dmesg - a can of whoop ass
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.4-3.fc17.x86_64 (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 SMP Tue Jun 26 20:54:56 UTC 2012
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000009ff60000 (usable)
BIOS-e820: 000000009ff60000 - 000000009ff6a000 (ACPI data)
BIOS-e820: 000000009ff6a000 - 000000009ff6b000 (ACPI NVS)
BIOS-e820: 000000009ff6b000 - 00000000a0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000460000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: Tyan Computer Corporation MCP55 /S2915 , BIOS v3.00.2915 10/10/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x460000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000460000000 aka 17920M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000a0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x9ff60 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f7940] f7940
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000097000] 97000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000009ff60000
0000000000 - 0080000000 page 1G
0080000000 - 009fe00000 page 2M
009fe00000 - 009ff60000 page 4k
kernel direct mapping tables up to 9ff60000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000460000000
0100000000 - 0440000000 page 1G
0440000000 - 0460000000 page 2M
kernel direct mapping tables up to 460000000 @ 9ff5e000-9ff60000
RAMDISK: 36f18000 - 37ff0000
ACPI: RSDP 00000000000f7910 00024 (v02 PTLTD )
ACPI: XSDT 000000009ff62f5f 0005C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 000000009ff68c5a 000F4 (v03 NVIDIA CK8S 06040000 PTL_ 000F4240)
ACPI: DSDT 000000009ff62fbb 05C2B (v01 NVIDIA CK8 06040000 MSFT 03000000)
ACPI: FACS 000000009ff6afc0 00040
ACPI: SSDT 000000009ff68d4e 010F4 (v01 AMD POWERNOW 06040000 AMD 00000001)
ACPI: SPCR 000000009ff69e42 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: MCFG 000000009ff69e92 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 000000009ff69ece 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 000000009ff69f06 000D2 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 000000009ff69fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
Number of physical nodes 2
Node 0 MemBase 0000000000000000 Limit 0000000260000000
Node 1 MemBase 0000000260000000 Limit 0000000460000000
Initmem setup node 0 0000000000000000-0000000260000000
NODE_DATA [000000025ffec000 - 000000025fffffff]
Initmem setup node 1 0000000260000000-0000000460000000
NODE_DATA [000000045ffec000 - 000000045fffffff]
[ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257e00000-ffff88025fdfffff] on node 0
[ffffea0009800000-ffffea00117fffff] PMD -> [ffff880457600000-ffff88045f5fffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00460000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x0009ff60
0: 0x00100000 -> 0x00260000
1: 0x00260000 -> 0x00460000
On node 0 totalpages: 2096876
DMA zone: 64 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 634784 pages, LIFO batch:31
Normal zone: 22528 pages used for memmap
Normal zone: 1419264 pages, LIFO batch:31
On node 1 totalpages: 2097152
Normal zone: 32768 pages used for memmap
Normal zone: 2064384 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xb8000000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 17, address 0xb8000000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 0000000000100000
PM: Registered nosave memory: 000000009ff60000 - 000000009ff6a000
PM: Registered nosave memory: 000000009ff6a000 - 000000009ff6b000
PM: Registered nosave memory: 000000009ff6b000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff880257c00000 s83008 r8192 d23488 u524288
pcpu-alloc: s83008 r8192 d23488 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4122343
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 94000000
PM: Registered nosave memory: 0000000094000000 - 0000000098000000
Memory: 16347812k/18350080k available (6146k kernel code, 1573968k absent, 428300k reserved, 7027k data, 1000k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:8448 nr_irqs:1152 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2699.938 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.87 BogoMIPS (lpj=2699938)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 009ff80000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
using AMD E400 aware idle routine
ACPI: Core revision 20120320
ftrace: allocating 22851 entries in 90 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Quad-Core AMD Opteron(tm) Processor 2384 stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
NMI watchdog: enabled, takes one hw-pmu counter.
#2
NMI watchdog: enabled, takes one hw-pmu counter.
#3
NMI watchdog: enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #4
NMI watchdog: enabled, takes one hw-pmu counter.
#5
NMI watchdog: enabled, takes one hw-pmu counter.
#6
NMI watchdog: enabled, takes one hw-pmu counter.
#7 Ok.
NMI watchdog: enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (43199.22 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9ff6a000-0x9ff6afff] (4096 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 10:55:07, date: 07/06/12
NET: Registered protocol family 16
node 0 link 2: io port [1000, 4fff]
node 1 link 0: io port [5000, 6fff]
node 1 link 0: io port [f000, ffff]
TOM: 00000000a0000000 aka 2560M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 2: mmio [a0000000, b7ffffff]
node 1 link 0: mmio [b8000000, cfffffff]
node 0 link 2: mmio [a0000, bffff]
node 0 link 2: mmio [e0000000, e7ffffff] ==> none
node 1 link 0: mmio [e8000000, efffffff] ==> none
TOM2: 0000000460000000 aka 17920M
bus: [00, 7f] on node 0 link 2
bus: 00 index 0 [io 0x0000-0x4fff]
bus: 00 index 1 [io 0x7000-0xefff]
bus: 00 index 2 [mem 0xa0000000-0xb7ffffff]
bus: 00 index 3 [mem 0x000a0000-0x000bffff]
bus: 00 index 4 [mem 0xd0000000-0xdfffffff]
bus: 00 index 5 [mem 0xf0000000-0xffffffff]
bus: 00 index 6 [mem 0x460000000-0xfcffffffff]
bus: [80, ff] on node 1 link 0
bus: 80 index 0 [io 0x5000-0x6fff]
bus: 80 index 1 [io 0xf000-0xffff]
bus: 80 index 2 [mem 0xb8000000-0xcfffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-82] at [mem 0xe0000000-0xe82fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe82fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0x4fff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xa0000000-0xb7ffffff]
pci_root PNP0A03:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d4000-0x000fffff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x4fff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xb7ffffff]
pci 0000:00:00.0: [10de:0369] type 00 class 0x050000
pci 0000:00:01.0: [10de:0364] type 00 class 0x060100
pci 0000:00:01.0: reg 10: [io 0x1c00-0x1c7f]
pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500
pci 0000:00:01.1: reg 10: [io 0x2000-0x203f]
pci 0000:00:01.1: reg 20: [io 0x2440-0x247f]
pci 0000:00:01.1: reg 24: [io 0x2400-0x243f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310
pci 0000:00:02.0: reg 10: [mem 0xa0004000-0xa0004fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320
pci 0000:00:02.1: reg 10: [mem 0xa0005000-0xa00050ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a
pci 0000:00:04.0: reg 20: [io 0x2480-0x248f]
pci 0000:00:05.0: [10de:037f] type 00 class 0x010185
pci 0000:00:05.0: reg 10: [io 0x24d0-0x24d7]
pci 0000:00:05.0: reg 14: [io 0x24c4-0x24c7]
pci 0000:00:05.0: reg 18: [io 0x24c8-0x24cf]
pci 0000:00:05.0: reg 1c: [io 0x24c0-0x24c3]
pci 0000:00:05.0: reg 20: [io 0x2490-0x249f]
pci 0000:00:05.0: reg 24: [mem 0xa0006000-0xa0006fff]
pci 0000:00:05.1: [10de:037f] type 00 class 0x010185
pci 0000:00:05.1: reg 10: [io 0x24e8-0x24ef]
pci 0000:00:05.1: reg 14: [io 0x24dc-0x24df]
pci 0000:00:05.1: reg 18: [io 0x24e0-0x24e7]
pci 0000:00:05.1: reg 1c: [io 0x24d8-0x24db]
pci 0000:00:05.1: reg 20: [io 0x24a0-0x24af]
pci 0000:00:05.1: reg 24: [mem 0xa0007000-0xa0007fff]
pci 0000:00:05.2: [10de:037f] type 00 class 0x010185
pci 0000:00:05.2: reg 10: [io 0x2800-0x2807]
pci 0000:00:05.2: reg 14: [io 0x24f4-0x24f7]
pci 0000:00:05.2: reg 18: [io 0x24f8-0x24ff]
pci 0000:00:05.2: reg 1c: [io 0x24f0-0x24f3]
pci 0000:00:05.2: reg 20: [io 0x24b0-0x24bf]
pci 0000:00:05.2: reg 24: [mem 0xa0008000-0xa0008fff]
pci 0000:00:06.0: [10de:0370] type 01 class 0x060401
pci 0000:00:06.1: [10de:0371] type 00 class 0x040300
pci 0000:00:06.1: reg 10: [mem 0xa0000000-0xa0003fff]
pci 0000:00:06.1: PME# supported from D3hot D3cold
pci 0000:00:08.0: [10de:0373] type 00 class 0x068000
pci 0000:00:08.0: reg 10: [mem 0xa0009000-0xa0009fff]
pci 0000:00:08.0: reg 14: [io 0x2808-0x280f]
pci 0000:00:08.0: reg 18: [mem 0xa0005800-0xa00058ff]
pci 0000:00:08.0: reg 1c: [mem 0xa0005400-0xa000540f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: [10de:0373] type 00 class 0x068000
pci 0000:00:09.0: reg 10: [mem 0xa000b000-0xa000bfff]
pci 0000:00:09.0: reg 14: [io 0x2810-0x2817]
pci 0000:00:09.0: reg 18: [mem 0xa000a000-0xa000a0ff]
pci 0000:00:09.0: reg 1c: [mem 0xa0005c00-0xa0005c0f]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: [10de:0376] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:0378] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: [10de:0377] type 01 class 0x060400
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
pci 0000:01:05.0: [104c:8023] type 00 class 0x0c0010
pci 0000:01:05.0: reg 10: [mem 0xa0104000-0xa01047ff]
pci 0000:01:05.0: reg 14: [mem 0xa0100000-0xa0103fff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0xa0100000-0xa01fffff]
pci 0000:00:06.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:06.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:06.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:06.0: bridge window [io 0x0d00-0x4fff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0xa0000000-0xb7ffffff] (subtractive decode)
pci 0000:02:00.0: [1b4b:9123] type 00 class 0x010601
pci 0000:02:00.0: reg 10: [io 0x3030-0x3037]
pci 0000:02:00.0: reg 14: [io 0x3024-0x3027]
pci 0000:02:00.0: reg 18: [io 0x3028-0x302f]
pci 0000:02:00.0: reg 1c: [io 0x3020-0x3023]
pci 0000:02:00.0: reg 20: [io 0x3000-0x300f]
pci 0000:02:00.0: reg 24: [mem 0xa0200000-0xa02007ff]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.1: [1b4b:91a4] type 00 class 0x01018f
pci 0000:02:00.1: reg 10: [io 0x3048-0x304f]
pci 0000:02:00.1: reg 14: [io 0x303c-0x303f]
pci 0000:02:00.1: reg 18: [io 0x3040-0x3047]
pci 0000:02:00.1: reg 1c: [io 0x3038-0x303b]
pci 0000:02:00.1: reg 20: [io 0x3010-0x301f]
pci 0000:02:00.1: reg 24: [mem 0xa0200800-0xa020080f]
pci 0000:02:00.1: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:02:00.1: PME# supported from D3hot
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0a.0: bridge window [mem 0xa0200000-0xa02fffff]
pci 0000:03:00.0: [1033:0125] type 01 class 0x060400
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.1: [1033:0125] type 01 class 0x060400
pci 0000:03:00.1: reg 10: [mem 0xa0300000-0xa030007f 64bit]
pci 0000:03:00.1: supports D1
pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0d.0: PCI bridge to [bus 03-05]
pci 0000:00:0d.0: bridge window [mem 0xa0300000-0xa03fffff]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.1: PCI bridge to [bus 05-05]
pci 0000:06:00.0: [10de:0e22] type 00 class 0x030000
pci 0000:06:00.0: reg 10: [mem 0xa2000000-0xa3ffffff]
pci 0000:06:00.0: reg 14: [mem 0xb0000000-0xb7ffffff 64bit pref]
pci 0000:06:00.0: reg 1c: [mem 0xa8000000-0xabffffff 64bit pref]
pci 0000:06:00.0: reg 24: [io 0x4000-0x407f]
pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:06:00.1: [10de:0beb] type 00 class 0x040300
pci 0000:06:00.1: reg 10: [mem 0xa0400000-0xa0403fff]
pci 0000:00:0f.0: PCI bridge to [bus 06-06]
pci 0000:00:0f.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0f.0: bridge window [mem 0xa0400000-0xa3ffffff]
pci 0000:00:0f.0: bridge window [mem 0xa8000000-0xb7ffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
pci_root PNP0A03:01: host bridge window [io 0x5000-0xffff]
pci_root PNP0A03:01: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A03:01: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:01: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:01: host bridge window [mem 0xb8000000-0xcfffffff]
pci_root PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d4000-0x000fffff])
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io 0x5000-0xffff]
pci_bus 0000:80: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:80: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:80: root bus resource [mem 0xb8000000-0xcfffffff]
pci 0000:80:00.0: [10de:0369] type 00 class 0x050000
pci 0000:80:01.0: [10de:0361] type 00 class 0x050000
pci 0000:80:01.0: reg 10: [io 0xfc00-0xfc7f]
pci 0000:80:01.0: reg 14: [mem 0xb8000000-0xb8000fff]
pci 0000:80:01.1: [10de:0368] type 00 class 0x0c0500
pci 0000:80:01.1: reg 10: [io 0x5000-0x503f]
pci 0000:80:01.1: reg 20: [io 0x5440-0x547f]
pci 0000:80:01.1: reg 24: [io 0x5400-0x543f]
pci 0000:80:01.1: PME# supported from D3hot D3cold
pci 0000:80:0a.0: [10de:0376] type 01 class 0x060400
pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0d.0: [10de:0378] type 01 class 0x060400
pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0f.0: [10de:0377] type 01 class 0x060400
pci 0000:80:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:80:0a.0: PCI bridge to [bus 81-81]
pci 0000:80:0d.0: PCI bridge to [bus 82-82]
pci 0000:83:00.0: [10de:0e22] type 00 class 0x030000
pci 0000:83:00.0: reg 10: [mem 0xba000000-0xbbffffff]
pci 0000:83:00.0: reg 14: [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:83:00.0: reg 1c: [mem 0xc0000000-0xc3ffffff 64bit pref]
pci 0000:83:00.0: reg 24: [io 0x6000-0x607f]
pci 0000:83:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:83:00.1: [10de:0beb] type 00 class 0x040300
pci 0000:83:00.1: reg 10: [mem 0xb8100000-0xb8103fff]
pci 0000:80:0f.0: PCI bridge to [bus 83-83]
pci 0000:80:0f.0: bridge window [io 0x6000-0x6fff]
pci 0000:80:0f.0: bridge window [mem 0xb8100000-0xbbffffff]
pci 0000:80:0f.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR5._PRT]
pci0000:80: Requesting ACPI _OSC control (0x1d)
pci0000:80: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LMA2] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LUS2] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 *11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 10 11 14 15 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 5 *7 10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LSI1] (IRQs *5 7 10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LSI2] (IRQs 5 7 *10 11 14 15 16 17 18 19 20 21 22 23)
ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:83:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:83:00.0
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009c000 - 000000000009ffff
reserve RAM buffer: 000000009ff60000 - 000000009fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0xffc00000-0xffffffff]
pnp 00:00: [mem 0xfec00000-0xfec00fff]
pnp 00:00: [mem 0xfee00000-0xfeefffff]
pnp 00:00: [mem 0xfed00000-0xfed00fff]
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-7f]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x03af window]
pnp 00:01: [io 0x03b0-0x03df window]
pnp 00:01: [io 0x03e0-0x0cf7 window]
pnp 00:01: [io 0x0d00-0x4fff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000dffff window]
pnp 00:01: [mem 0xa0000000-0xb7ffffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [irq 0 disabled]
pnp 00:02: [irq 8]
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [mem 0xa0040000-0xa0047fff]
system 00:03: [mem 0xa0040000-0xa0047fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x1000-0x107f]
pnp 00:04: [io 0x1080-0x10ff]
pnp 00:04: [io 0x1400-0x147f]
pnp 00:04: [io 0x1480-0x14ff]
pnp 00:04: [io 0x1800-0x187f]
pnp 00:04: [io 0x1880-0x18ff]
pnp 00:04: [io 0x2440-0x247f]
pnp 00:04: [io 0x2400-0x243f]
system 00:04: [io 0x1000-0x107f] has been reserved
system 00:04: [io 0x1080-0x10ff] has been reserved
system 00:04: [io 0x1400-0x147f] has been reserved
system 00:04: [io 0x1480-0x14ff] has been reserved
system 00:04: [io 0x1800-0x187f] has been reserved
system 00:04: [io 0x1880-0x18ff] has been reserved
system 00:04: [io 0x2440-0x247f] has been reserved
system 00:04: [io 0x2400-0x243f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0060]
pnp 00:05: [io 0x0064]
pnp 00:05: [irq 1]
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: [irq 12]
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x0073]
pnp 00:07: [io 0x0074-0x007f]
pnp 00:07: [io 0x0091-0x0093]
pnp 00:07: [io 0x0097-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0600-0x06fe]
pnp 00:07: [io 0x0c05-0x0c06]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0600-0x06fe] has been reserved
system 00:07: [io 0x0c05-0x0c06] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0000-0x0008]
pnp 00:08: [io 0x000a-0x000f]
pnp 00:08: [io 0x0081-0x0083]
pnp 00:08: [io 0x0087]
pnp 00:08: [io 0x0089-0x008b]
pnp 00:08: [io 0x008f]
pnp 00:08: [io 0x00c0-0x00d1]
pnp 00:08: [io 0x00d4-0x00df]
pnp 00:08: [dma 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:09: [io 0x0061]
pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:0a: [io 0x0070-0x0071]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0b: [io 0x00f0-0x00f1]
pnp 00:0b: [irq 13]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0c: [io 0x03f8-0x03ff]
pnp 00:0c: [irq 4]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [io 0x02f8-0x02ff]
pnp 00:0d: [irq 3]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0e: [io 0x03f0-0x03f5]
pnp 00:0e: [io 0x03f7]
pnp 00:0e: [irq 6]
pnp 00:0e: [dma 2]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0f: [bus 80-ff]
pnp 00:0f: [io 0x0cf8-0x0cff]
pnp 00:0f: [io 0x5000-0xffff window]
pnp 00:0f: [io 0x03b0-0x03df window]
pnp 00:0f: [mem 0x000a0000-0x000bffff window]
pnp 00:0f: [mem 0x000c0000-0x000dffff window]
pnp 00:0f: [mem 0xb8000000-0xcfffffff window]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:10: [mem 0xb8040000-0xb8047fff]
system 00:10: [mem 0xb8040000-0xb8047fff] has been reserved
system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:11: [io 0xf000-0xf07f]
pnp 00:11: [io 0xf080-0xf0ff]
pnp 00:11: [io 0xf400-0xf47f]
pnp 00:11: [io 0xf480-0xf4ff]
pnp 00:11: [io 0xf800-0xf87f]
pnp 00:11: [io 0xf880-0xf8ff]
system 00:11: [io 0xf000-0xf07f] has been reserved
system 00:11: [io 0xf080-0xf0ff] has been reserved
system 00:11: [io 0xf400-0xf47f] has been reserved
system 00:11: [io 0xf480-0xf4ff] has been reserved
system 00:11: [io 0xf800-0xf87f] has been reserved
system 00:11: [io 0xf880-0xf8ff] has been reserved
system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 18 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:0a.0: BAR 15: assigned [mem 0xa4000000-0xa40fffff pref]
pci 0000:00:06.0: PCI bridge to [bus 01-01]
pci 0000:00:06.0: bridge window [mem 0xa0100000-0xa01fffff]
pci 0000:02:00.0: BAR 6: assigned [mem 0xa4000000-0xa400ffff pref]
pci 0000:02:00.1: BAR 6: assigned [mem 0xa4010000-0xa401ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:0a.0: bridge window [mem 0xa0200000-0xa02fffff]
pci 0000:00:0a.0: bridge window [mem 0xa4000000-0xa40fffff pref]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.1: PCI bridge to [bus 05-05]
pci 0000:00:0d.0: PCI bridge to [bus 03-05]
pci 0000:00:0d.0: bridge window [mem 0xa0300000-0xa03fffff]
pci 0000:06:00.0: BAR 6: assigned [mem 0xac000000-0xac07ffff pref]
pci 0000:00:0f.0: PCI bridge to [bus 06-06]
pci 0000:00:0f.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0f.0: bridge window [mem 0xa0400000-0xa3ffffff]
pci 0000:00:0f.0: bridge window [mem 0xa8000000-0xb7ffffff 64bit pref]
pci 0000:80:0a.0: PCI bridge to [bus 81-81]
pci 0000:80:0d.0: PCI bridge to [bus 82-82]
pci 0000:83:00.0: BAR 6: assigned [mem 0xc4000000-0xc407ffff pref]
pci 0000:80:0f.0: PCI bridge to [bus 83-83]
pci 0000:80:0f.0: bridge window [io 0x6000-0x6fff]
pci 0000:80:0f.0: bridge window [mem 0xb8100000-0xbbffffff]
pci 0000:80:0f.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 23
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 6 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 7 [io 0x0d00-0x4fff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0xa0000000-0xb7ffffff]
pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
pci_bus 0000:01: resource 5 [io 0x03b0-0x03df]
pci_bus 0000:01: resource 6 [io 0x03e0-0x0cf7]
pci_bus 0000:01: resource 7 [io 0x0d00-0x4fff]
pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 9 [mem 0xa0000000-0xb7ffffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xa0200000-0xa02fffff]
pci_bus 0000:02: resource 2 [mem 0xa4000000-0xa40fffff pref]
pci_bus 0000:03: resource 1 [mem 0xa0300000-0xa03fffff]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xa0400000-0xa3ffffff]
pci_bus 0000:06: resource 2 [mem 0xa8000000-0xb7ffffff 64bit pref]
pci_bus 0000:80: resource 4 [io 0x5000-0xffff]
pci_bus 0000:80: resource 5 [io 0x03b0-0x03df]
pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:80: resource 7 [mem 0xb8000000-0xcfffffff]
pci_bus 0000:83: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:83: resource 1 [mem 0xb8100000-0xbbffffff]
pci_bus 0000:83: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:06:00.0: Boot video device
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
pci 0000:80:00.0: Found enabled HT MSI Mapping
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17248k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 94000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Simple Boot Flag at 0x37 set to 0x1
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1341572107.821:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32091
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0a.0: irq 64 for MSI/MSI-X
pcieport 0000:00:0d.0: irq 65 for MSI/MSI-X
pcieport 0000:00:0f.0: irq 66 for MSI/MSI-X
pcieport 0000:80:0a.0: irq 67 for MSI/MSI-X
pcieport 0000:80:0d.0: irq 68 for MSI/MSI-X
pcieport 0000:80:0f.0: irq 69 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:02:00.0: version 3.0
ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 20
ahci 0000:02:00.0: irq 70 for MSI/MSI-X
ahci 0000:02:00.0: controller can do FBS, turning on CAP_FBS
ahci 0000:02:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq fbs pio
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xa0200000 port 0xa0200100 irq 70
ata2: SATA max UDMA/133 abar m2048@0xa0200000 port 0xa0200180 irq 70
ata3: SATA max UDMA/133 abar m2048@0xa0200000 port 0xa0200200 irq 70
ata4: SATA max UDMA/133 abar m2048@0xa0200000 port 0xa0200280 irq 70
ata5: SATA max UDMA/133 abar m2048@0xa0200000 port 0xa0200300 irq 70
ata6: SATA max UDMA/133 abar m2048@0xa0200000 port 0xa0200380 irq 70
ata7: SATA max UDMA/133 abar m2048@0xa0200000 port 0xa0200400 irq 70
ata8: SATA max UDMA/133 abar m2048@0xa0200000 port 0xa0200480 irq 70
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 21, io mem 0xa0005000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.4-3.fc17.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xa0004000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.4-3.fc17.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 4:406:931
rtc_cmos 00:0a: setting system clock to 2012-07-06 10:55:08 UTC (1341572108)
powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2384 (8 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2700 MHz)
powernow-k8: 1 : pstate 1 (2000 MHz)
powernow-k8: 2 : pstate 2 (1500 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
powernow-k8: 0 : pstate 0 (2700 MHz)
powernow-k8: 1 : pstate 1 (2000 MHz)
powernow-k8: 2 : pstate 2 (1500 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
Initializing network drop monitor service
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata8.00: configured for UDMA/66
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-9: INTEL SSDSC2CT120A3, 300i, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CT12 300i PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
scsi 7:0:0:0: Attached scsi generic sg1 type 3
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1000k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 2028k freed
Freeing unused kernel memory: 1484k freed
dracut: dracut-018-78.git20120622.fc17
dracut: rd.luks=0: removing cryptoluks activation
udevd[200]: starting version 182
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19
usb 2-9: new full-speed USB device number 2 using ohci_hcd
[drm] nouveau 0000:06:00.0: Detected an NVc0 generation card (0x0c4100a1)
[drm] nouveau 0000:06:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:06:00.0: ... appears to be valid
[drm] nouveau 0000:06:00.0: Using VBIOS from PRAMIN
[drm] nouveau 0000:06:00.0: BIT BIOS found
[drm] nouveau 0000:06:00.0: Bios version 70.04.1b.00
[drm] nouveau 0000:06:00.0: TMDS table version 2.0
[drm] nouveau 0000:06:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:06:00.0: DCB version 4.0
[drm] nouveau 0000:06:00.0: DCB outp 00: 02000300 00000000
[drm] nouveau 0000:06:00.0: DCB outp 01: 01000302 00020030
[drm] nouveau 0000:06:00.0: DCB outp 02: 04011380 00000000
[drm] nouveau 0000:06:00.0: DCB outp 03: 08011382 00020030
[drm] nouveau 0000:06:00.0: DCB outp 04: 02022362 00020010
[drm] nouveau 0000:06:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:06:00.0: DCB conn 01: 00010130
[drm] nouveau 0000:06:00.0: DCB conn 02: 00002261
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 0 at offset 0x67DD
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 1 at offset 0x6EAE
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 2 at offset 0x8122
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 3 at offset 0x812C
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table 4 at offset 0x830B
[drm] nouveau 0000:06:00.0: Parsing VBIOS init table at offset 0x8370
[drm] nouveau 0000:06:00.0: 0x8370: Condition still not met after 20ms, skipping following opcodes
[TTM] Zone kernel: Available graphics memory: 8217762 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] nouveau 0000:06:00.0: Detected 1024MiB VRAM (GDDR5)
[drm] nouveau 0000:06:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:06:00.0: 4 available performance level(s)
[drm] nouveau 0000:06:00.0: 0: core 50MHz shader 101MHz memory 135MHz voltage 875mV
[drm] nouveau 0000:06:00.0: 1: core 405MHz shader 810MHz memory 324MHz voltage 912mV
[drm] nouveau 0000:06:00.0: 2: core 405MHz shader 810MHz memory 1800MHz voltage 937mV-1075mV
[drm] nouveau 0000:06:00.0: 3: core 715MHz shader 1430MHz memory 1800MHz voltage 937mV-1075mV
[drm] nouveau 0000:06:00.0: c: core 50MHz shader 101MHz memory 135MHz voltage 875mV fanspeed 40%
usb 2-9: New USB device found, idVendor=413c, idProduct=1003
usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-9: Product: Dell USB Keyboard Hub
usb 2-9: Manufacturer: Dell
Refined TSC clocksource calibration: 2700.000 MHz.
Switching to clocksource tsc
hub 2-9:1.0: USB hub found
hub 2-9:1.0: 3 ports detected
[drm] nouveau 0000:06:00.0: allocated 1680x1050 fb: 0x1c0000, bo ffff880251e64400
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
fb0: nouveaufb frame buffer device
drm: registered panic notifier
[drm] Initialized nouveau 1.0.0 20120316 for 0000:06:00.0 on minor 0
nouveau 0000:83:00.0: enabling device (0146 -> 0147)
ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 47
[drm] nouveau 0000:83:00.0: Detected an NVc0 generation card (0x0c4100a1)
[drm] nouveau 0000:83:00.0: Checking PRAMIN for VBIOS
[drm] nouveau 0000:83:00.0: ... BIOS signature not found
[drm] nouveau 0000:83:00.0: Checking PROM for VBIOS
usb 2-10: new full-speed USB device number 3 using ohci_hcd
[drm] nouveau 0000:83:00.0: ... appears to be valid
[drm] nouveau 0000:83:00.0: Using VBIOS from PROM
[drm] nouveau 0000:83:00.0: BIT BIOS found
[drm] nouveau 0000:83:00.0: Bios version 70.04.1b.00
[drm] nouveau 0000:83:00.0: TMDS table version 2.0
[drm] nouveau 0000:83:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:83:00.0: DCB version 4.0
[drm] nouveau 0000:83:00.0: DCB outp 00: 02000300 00000000
[drm] nouveau 0000:83:00.0: DCB outp 01: 01000302 00020030
[drm] nouveau 0000:83:00.0: DCB outp 02: 04011380 00000000
[drm] nouveau 0000:83:00.0: DCB outp 03: 08011382 00020030
[drm] nouveau 0000:83:00.0: DCB outp 04: 02022362 00020010
[drm] nouveau 0000:83:00.0: DCB conn 00: 00001030
[drm] nouveau 0000:83:00.0: DCB conn 01: 00010130
[drm] nouveau 0000:83:00.0: DCB conn 02: 00002261
[drm] nouveau 0000:83:00.0: Adaptor not initialised, running VBIOS init tables.
[drm] nouveau 0000:83:00.0: Parsing VBIOS init table 0 at offset 0x67DD
[drm] nouveau 0000:83:00.0: Parsing VBIOS init table 1 at offset 0x6EAE
usb 2-10: New USB device found, idVendor=046d, idProduct=c068
usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-10: Product: G500
usb 2-10: Manufacturer: Logitech
usb 2-10: SerialNumber: 29ED10FCFF0016
input: Logitech G500 as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input2
generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:02.0-10/input0
[drm] nouveau 0000:83:00.0: Parsing VBIOS init table 2 at offset 0x8122
[drm] nouveau 0000:83:00.0: Parsing VBIOS init table 3 at offset 0x812C
[drm] nouveau 0000:83:00.0: Parsing VBIOS init table 4 at offset 0x830B
[drm] nouveau 0000:83:00.0: Parsing VBIOS init table at offset 0x8370
input: Logitech G500 as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.1/input/input3
generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:02.0-10/input1
[drm] nouveau 0000:83:00.0: Detected 1024MiB VRAM (GDDR5)
[drm] nouveau 0000:83:00.0: 512 MiB GART (aperture)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] nouveau 0000:83:00.0: 4 available performance level(s)
[drm] nouveau 0000:83:00.0: 0: core 50MHz shader 101MHz memory 135MHz voltage 875mV
[drm] nouveau 0000:83:00.0: 1: core 405MHz shader 810MHz memory 324MHz voltage 912mV
[drm] nouveau 0000:83:00.0: 2: core 405MHz shader 810MHz memory 1800MHz voltage 937mV-1075mV
[drm] nouveau 0000:83:00.0: 3: core 715MHz shader 1430MHz memory 1800MHz voltage 937mV-1075mV
[drm] nouveau 0000:83:00.0: c: core 50MHz shader 101MHz memory 135MHz voltage 875mV fanspeed 40%
usb 2-9.1: new full-speed USB device number 4 using ohci_hcd
usb 2-9.1: New USB device found, idVendor=413c, idProduct=2010
usb 2-9.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-9.1: Product: Dell USB Keyboard
usb 2-9.1: Manufacturer: Dell
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9.1/2-9.1:1.0/input/input4
generic-usb 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-9.1/input0
No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] nouveau 0000:83:00.0: allocated 1024x768 fb: 0x1c0000, bo ffff8804522b1400
fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.0.0 20120316 for 0000:83:00.0 on minor 1
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9.1/2-9.1:1.1/input/input5
generic-usb 0003:413C:2010.0004: input,hidraw3: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:02.0-9.1/input1
dracut: Starting plymouth daemon
dracut: rd.md=0: removing MD RAID activation
pata_amd 0000:00:04.0: version 0.4.1
pata_amd 0000:00:04.0: enabling device (0004 -> 0005)
pata_amd 0000:00:04.0: setting latency timer to 64
scsi8 : pata_amd
scsi9 : pata_amd
ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2480 irq 14
ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2488 irq 15
ata9: port disabled--ignoring
ata10: port disabled--ignoring
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 18
sata_nv 0000:00:05.0: Using SWNCQ mode
sata_nv 0000:00:05.0: setting latency timer to 64
scsi10 : sata_nv
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 17
scsi11 : sata_nv
ata11: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 18
ata12: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 18
ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 16
sata_nv 0000:00:05.1: Using SWNCQ mode
sata_nv 0000:00:05.1: setting latency timer to 64
scsi12 : pata_marvell
scsi13 : pata_marvell
ata13: PATA max UDMA/100 cmd 0x3048 ctl 0x303c bmdma 0x3010 irq 23
ata14: PATA max UDMA/133 cmd 0x3040 ctl 0x3038 bmdma 0x3018 irq 23
scsi14 : sata_nv
scsi15 : sata_nv
ata15: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 16
ata16: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 16
ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 10
sata_nv 0000:00:05.2: Using SWNCQ mode
sata_nv 0000:00:05.2: setting latency timer to 64
scsi16 : sata_nv
scsi17 : sata_nv
ata17: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 10
ata18: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 10
firewire_ohci 0000:01:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
ata11: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
firewire_core 0000:01:05.0: created device fw0: GUID 00e0810000272877, S400
ata12: SATA link down (SStatus 0 SControl 300)
ata16: SATA link down (SStatus 0 SControl 300)
ata18: SATA link down (SStatus 0 SControl 300)
dracut: Scanning for dmraid devices nvidia_gecbdbfa
dracut: Found dmraid sets:
dracut: nvidia_gecbdbfa
dracut: Activating nvidia_gecbdbfa
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
dracut: RAID set "nvidia_gecbdbfa" was activated
dracut: RAID set "nvidia_gecbdbfa" was not activated
dracut: Scanning devices dm-2 for LVM logical volumes vg_sarah/lv_root vg_sarah/lv_swap
dracut: inactive '/dev/vg_sarah/lv_swap' [17.72 GiB] inherit
dracut: inactive '/dev/vg_sarah/lv_home' [43.56 GiB] inherit
dracut: inactive '/dev/vg_sarah/lv_root' [50.00 GiB] inherit
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
dracut: Checking ext4: /dev/mapper/vg_sarah-lv_root
dracut: issuing e2fsck -a /dev/mapper/vg_sarah-lv_root
dracut: /dev/mapper/vg_sarah-lv_root: clean, 142298/3276800 files, 1322471/13107200 blocks
dracut: Remounting /dev/mapper/vg_sarah-lv_root with -o ro
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/vg_sarah-lv_root
dracut: Switching root
type=1404 audit(1341572113.360:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 101474 rules.
SELinux: 2048 avtab hash slots, 101474 rules.
SELinux: 9 users, 15 roles, 4169 types, 223 bools, 1 sens, 1024 cats
SELinux: 83 classes, 101474 rules
SELinux: Permission ptrace_child in class process not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev dm-4, type ext4), uses xattr
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
type=1403 audit(1341572113.745:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 400ms 68us.
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: Relabelled /dev and /run in 79ms 283us.
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
systemd[1]: Set hostname to .
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
systemd-journald[525]: Fixed max_use=802.5M max_size=100.3M min_size=64.0K keep_free=401.2M
systemd-journald[525]: Vacuuming...
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
udevd[532]: starting version 182
EXT4-fs (dm-4): re-mounted. Opts: (null)
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
i2c i2c-24: nForce2 SMBus adapter at 0x2440
i2c i2c-25: nForce2 SMBus adapter at 0x2400
i2c i2c-26: nForce2 SMBus adapter at 0x5440
i2c i2c-27: nForce2 SMBus adapter at 0x5400
nv_tco: NV TCO WatchDog Timer Driver v0.01
nv_tco: Watchdog reboot not detected
nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
forcedeth 0000:00:08.0: setting latency timer to 64
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0
AMD64 EDAC driver v3.4.0
microcode: CPU0: patch_level=0x01000086
microcode: CPU0: new patch_level=0x010000db
microcode: CPU1: patch_level=0x01000086
microcode: CPU1: new patch_level=0x010000db
microcode: CPU2: patch_level=0x01000086
microcode: CPU2: new patch_level=0x010000db
microcode: CPU3: patch_level=0x01000086
microcode: CPU3: new patch_level=0x010000db
microcode: CPU4: patch_level=0x01000086
microcode: CPU4: new patch_level=0x010000db
microcode: CPU5: patch_level=0x01000086
microcode: CPU5: new patch_level=0x010000db
microcode: CPU6: patch_level=0x01000086
microcode: CPU6: new patch_level=0x010000db
microcode: CPU7: patch_level=0x01000086
microcode: CPU7: new patch_level=0x010000db
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Adding 18579452k swap on /dev/mapper/vg_sarah-lv_swap. Priority:0 extents:1 across:18579452k SS
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-1, type ext4), uses xattr
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:74:03:36
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 23
forcedeth 0000:00:09.0: setting latency timer to 64
forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:74:03:37
forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
hda_intel: Disabling MSI
snd_hda_intel 0000:00:06.1: setting latency timer to 64
ALSA sound/pci/hda/hda_intel.c:1540 Enable delay in RIRB handling
hda_codec: ALC262: SKU not ready 0x411111f0
ALSA sound/pci/hda/hda_codec.c:5099 autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
ALSA sound/pci/hda/hda_codec.c:5103 speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:5107 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:5108 mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:5111 dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:5112 inputs:
ALSA sound/pci/hda/hda_codec.c:5116 Rear Mic=0x18
ALSA sound/pci/hda/hda_codec.c:5116 Front Mic=0x19
ALSA sound/pci/hda/hda_codec.c:5116 Line=0x1a
ALSA sound/pci/hda/hda_codec.c:5116 Aux=0x14
ALSA sound/pci/hda/hda_codec.c:5118
ALSA sound/pci/hda/patch_realtek.c:1317 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1400 realtek: Enable default setup for auto mode as fallback
input: HDA NVidia Line as /devices/pci0000:00/0000:00:06.1/sound/card0/input6
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input7
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input8
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input9
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:06.1/sound/card0/input10
hda_intel: Disabling MSI
ALSA sound/pci/hda/hda_intel.c:1540 Enable delay in RIRB handling
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0f.0/0000:06:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0f.0/0000:06:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0f.0/0000:06:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0f.0/0000:06:00.1/sound/card1/input14
ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 46
hda_intel: Disabling MSI
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ALSA sound/pci/hda/hda_intel.c:1540 Enable delay in RIRB handling
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:80/0000:80:0f.0/0000:83:00.1/sound/card2/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:80/0000:80:0f.0/0000:83:00.1/sound/card2/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:80/0000:80:0f.0/0000:83:00.1/sound/card2/input17
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:80/0000:80:0f.0/0000:83:00.1/sound/card2/input18
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-5, type ext4), uses xattr
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
forcedeth 0000:00:08.0: irq 71 for MSI/MSI-X
forcedeth 0000:00:08.0: eth0: MSI enabled
forcedeth 0000:00:09.0: irq 72 for MSI/MSI-X
forcedeth 0000:00:09.0: eth1: MSI enabled
forcedeth 0000:00:09.0: eth1: no link during initialization
ADDRCONF(NETDEV_UP): eth1: link is not ready
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
vgaarb: device changed decodes: PCI:0000:83:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm:drm_debugfs_create_files] *ERROR* Cannot create /sys/kernel/debug/dri/channel/3
[drm:drm_debugfs_create_files] *ERROR* Cannot create /sys/kernel/debug/dri/channel/3
[drm] nouveau 0000:06:00.0: PFIFO: unknown status 0x40000000
eth0: no IPv6 routers present
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
NFS: Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
SELinux: initialized (dev 0:40, type nfs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev 0:43, type nfs4), uses genfs_contexts
SELinux: initialized (dev 0:44, type nfs4), uses genfs_contexts
SELinux: initialized (dev 0:43, type nfs4), uses genfs_contexts